Product details

Mechanical specifications


project unit IGM2MB IGM15EX IGM15NC IGM15NC-2 IGM2TNC
Grinding aperture mm ø6~200 ø6~150 ø6~100 ø30~200
Grinding stroke mm ma×200 ma×125 ma×200
Rotating path on the workbench mm ø600 ø420
Rotating diameter inside the chuck mm ø350 ø260 ø350
Height below the bed to the center of the chuck mm 1110 1000 1070
Grinding wheel shaft feed (X-axis) Maximum movement mm 230 170 300 230
Grinding feed rate mm/min 0.2~4 0.001~10000
Rapid feed rate mm/min 500 10000
Work table left and right feed (Z axis) Maximum movement mm 500
Grinding feed rate mm/min 0.1~15000 10000
Rapid feed rate mm/min 20000 10000
Minimum setting unit X axis mm ø0.0001
Z axis mm 0.001 0.0001
Working spindle revolution min-1 50~1200 100~850 50~400
Working spindle speed angle deg -5~30 -5~15 0~15
motor Spindle kW 1.51/4 1.8(AC servo motor) 1.5/4
Grinding wheel shaft kW 3.7/2 3.7(AC servo motor) 2.2/2
X axis kW 0.75 1.2(AC servo motor) 1.4
Z axis kW 3 1.2(AC servo motor) 1.6
Required power (including optional water tank) kVA 16 8 12 8
Floor area (length × width × height) (including optional water tank) mm 2450×2050×1848 2525×3092×1786 2525×3292×1786 3660×2440×1780
Body weight kg 3000 2500 2800 5400